100m2 600g Fibreglass Roof Kit Iron Dark Grey
- Polyester Roofing Resin & Topcoat
- 600g/m² Fibreglass chopped strand matting.
- 50m by 75mm woven tape to bandage your trims to the deck.
Your Fibreglass Roof Kit Contents:
-
100-m2 600g Fibreglass Roof kit
7x 20kg Low cost Roof Resin 7x Catalyst 500g
3x 5kg GP10 Roof Resin 3x Catalyst 100g
3x 20kg Dark Topcoat Grey 3x Catalyst 500g
2x Fibreglass rolls – 600g 53.3m2 33KG
2x 75mm Woven tape 50M
Important information
Our GRP kits are designed for use on OSB (Orientated Stranded Board) with Tongue & Groove Edge, The 50 Linear Metre Woven bandage is for use around the perimeter edges where the trims meet the roof decking. Additional Woven and Resin may be required and can be purchased separately (here).
| Roof Size | 100 m² |
|---|---|
| Important Information To Consider | We have taken the hard work out of providing the correct quantities for you. By simply selecting your roof size in m² we guarantee you will have the correct volume of Resin's, Topcoat's, Hardeners and Matting to complete the flat roof you have. Please ensure you order the correct kit size for your project, we cannot take any responsibility for kits ordered that are the incorrect size for your roof. If your a DIY user we strongly recommend ordering a slightly larger kit than required to allow for any unforeseen circumstances or mis calculations with mixing ratio's. For further technical support call us on 0207 101 3977 |
View Downloadable Information
-
This Item:
100m2 600g Fibreglass Roof Kit Iron Dark Grey
£1,473.53 £1,227.94
-
D260 Fillet Trim 3m Length
£12.30 £10.25
-
A200 Drip Facia Trim 3m Length
£12.30 £10.25
-
Universal GRP corner trims
£10.36 £8.63
-
A170 Drip Facia Trim 3m Length
£12.30 £10.25
-
B260 GRP/Fibreglass Raised Edge 3m Length
£12.30 £10.25
-
