25m2 600g Fibreglass Roof Kit Dark Grey
- Polyester Roofing Resin & Topcoat
- 600g/m² Fibreglass chopped strand matting.
- 50m by 75mm woven tape to bandage your trims to the deck.

Your Fibreglass Roof Kit Contents:
-
25m2 450g Fibreglass Roof kit
2x 20kg Low cost Roof Resin 2x Catalyst 500g
1x 20kg Dark Topcoat Grey 1x Catalyst 500g
1x Fibreglass rolls – 600g 25m2 15KG
1x 75mm Woven tape 50m
Important information
Our GRP kits are designed for use on OSB (Orientated Stranded Board) with Tongue & Groove Edge, The 50 Linear Metre Woven bandage is for use around the perimeter edges where the trims meet the roof decking. Additional Woven and Resin may be required and can be purchased separately (here).
Roof Size | 25 m² |
---|---|
Important Information To Consider | We have taken the hard work out of providing the correct quantities for you. By simply selecting your roof size in m² we guarantee you will have the correct volume of Resin's, Topcoat's, Hardeners and Matting to complete the flat roof you have. Please ensure you order the correct kit size for your project, we cannot take any responsibility for kits ordered that are the incorrect size for your roof. If your a DIY user we strongly recommend ordering a slightly larger kit than required to allow for any unforeseen circumstances or mis calculations with mixing ratio's. For further technical support call us on 0207 101 3977 |
-
This Item:
25m2 600g Fibreglass Roof Kit Dark Grey
£348.02 £290.02
-
B260 GRP Raised Edge Trim
£12.30 £10.25
-
A200 GRP Drip Trim
£12.30 £10.25
-
3 & 6 piece Resin/Topcoat Applicator Roller set
£16.20 £13.50
-
Paddle Rollers- Medium 140mm x 21mm
Special Price £5.69 £4.74 Regular Price £5.99
-
D260 Wall Fillet trim
£12.30 £10.25
-