30m2 450g Fibreglass Roof Kit Bespoke Colour

£394.67 £328.89
In stock

Maximum number of characters: 50

  • Polyester Roofing Resin & Topcoat
  • Colour Subject To Stock - Delivery Times Vary
  • 450g/m² Fibreglass chopped strand matting.
  • 50m by 75mm woven tape to bandage your trims to the deck.

Your Fibreglass Roof Kit Contents:

  • 1x 20kg Low cost Roof Resin 1x Catalyst 500g
  • 3x 5kg GP10 General Purpose Roof Resin 3x Catalyst 100g
  • 4x 5kg Topcoat bespoke colour 4x Catalyst 100g
  • 1x Fibreglass rolls - 450g 33 m2 15KG
  • 1x 75mm Woven tape 50m

Important information

Our GRP kits are designed for use on OSB (Orientated Stranded Board) with Tongue & Groove Edge, The 50 Linear Metre Woven bandage is for use around the perimeter edges where the trims meet the roof decking. Additional Woven and Resin may be required and can be purchased separately (here).

More Information
Roof Size 30 m²
Important Information To Consider

We have taken the hard work out of providing the correct quantities for you. By simply selecting your roof size in m² we guarantee you will have the correct volume of Resin's, Topcoat's, Hardeners and Matting to complete the flat roof you have.

Please ensure you order the correct kit size for your project, we cannot take any responsibility for kits ordered that are the incorrect size for your roof. If your a DIY user we strongly recommend ordering a slightly larger kit than required to allow for any unforeseen circumstances or mis calculations with mixing ratio's.

For further technical support call us on 0207 101 3977

Frequently Bought Together