5 sqm 600g Fibreglass Roof Kit Bespoke Colour
- Polyester Roofing Resin & Topcoat
- Colour Subject To Stock - Delivery Times Vary
- 450g/m² Fibreglass chopped strand matting.
- 50m by 75mm woven tape to bandage your trims to the deck.
Your 5 sqm Fibreglass Roof Kit Contents:
- 10kg Polyester Resin (includes catalyst)
- 1x 50m roll of 75mm Woven Glass Tape
- 3kg 6.6m² 450g Chopped Strand Matting
- 1 x 5kg Roofing Top Coat (includes catalyst)
Our GRP kits are designed for use on OSB (Orientated Stranded Board) with Tongue & Groove Edge, The 50 Linear Metre Woven bandage is for use around the perimeter edges where the trims meet the roof decking. Additional Woven and Resin may be required and can be purchased separately (here).
|Roof Size||5 m²|
|Important Information To Consider||
We have taken the hard work out of providing the correct quantities for you. By simply selecting your roof size in m² we guarantee you will have the correct volume of Resin's, Topcoat's, Hardeners and Matting to complete the flat roof you have.
Please ensure you order the correct kit size for your project, we cannot take any responsibility for kits ordered that are the incorrect size for your roof. If your a DIY user we strongly recommend ordering a slightly larger kit than required to allow for any unforeseen circumstances or mis calculations with mixing ratio's.
For further technical support call us on 0207 101 3977
Safety Sheet for Resin Safety Sheet For Topcoat Safety Sheet for Catalyst