A250 GRP Drip Trim

A250 GRP Drip Trim

These drip trims are to be fitted to gutter edges to allow water run off, made from light grey Fibreglass ready to paint
Approx 1-2mm Thick
Easy fix with clout nails
Use in Conjunction with GRP Raised edge trim
Compatible with C1 and C4 universal corners
Can be Lapped together by 50mm then bonded with PU Adhesive, bandage joints prior to Topcoat application
note do ensure a 2x1 batton is doubled up and fitted to the fascia, bead with pu ahesive to bond the face of the trim

Useful Info

Can be cut and made to measure on-site using an angle grinder or fine tooth cut saw

Length

This trim is 3 Metres long

Large

A250 drip trim (75 x 140mm down the fascia ) Drip will match B300 Raised edge CLICK HERE FOR A 360 VIEW