B260 GRP Raised Edge Trim

B260 Raised edge trim

These raised trims are to be fitted to edges to prevent water run off, made from light grey fibreglass ready to paint
Approx 1-2mm Thick
Easy fix with clout nails
Use in Conjunction with GRP Drip edge trim
Compatible with C1 and C4 universal corners
Can be Lapped together by 50mm then bonded with PU Adhesive, bandage joints prior to Topcoat application
note do ensure a 2x1 batten is and fitted to the fascia, bead with pu adhesive to bond the face of the trim

Useful Info

Can be cut and made to measure on-site using an angle grinder or fine tooth cut saw

Length

This trim is 3 Metres long

Medium

B260 grp trim (75 x 90mm down the fascia.) Raised will match A200 drip edge CLICK HERE FOR A 360 VIEW