Flat Rubber Roof Kits
Flat Roof Kits for extensions where the front edge has a gutter and the back edge is adjoining a house wall.
This Flat Rubber Roof Kit is easy to install, looks great and has a life expectancy of up to 50 years! EPDM rubber membranes are UV, Ozone and Infrared stable so will not crack, blister or peel. We have put together a kit including the 1.2mm One-Piece EPDM rubber membrane, adhesives and edging trims.
Colour: Lead / Slate Grey
Used For: EPDM rubber roof for garage, extension, or porch where the roof is joined to a wall
Included in Kit:
- -1.2mm thick ClassicBond EPDM Membrane (Size as per roof kit chosen)
- -Water Based Adhesive to adhere membrane to roof deck
- -Contact adhesive to adhere perimeter of roof deck to Membrane
- -Sure EdgeGutter for front edge
- -Sure Edge Kerb for both side edges
- -Sure Edge Corner for both front corners
- -Wall trim to act as flashing against your house wall
- -External corner atches & primer for both back corners where roof meets house wall
- -Tools requires for DIY Installation(Rollers, Scissors & Paint Brush)
- -All Pins and Clips to go with Trims
- -Installation Guide
WE CAN TAILOR THE KIT TO SUIT YOUR ROOF - CALL 0207 101 3977 TO DISCUSS
The Membrane size is the same as mentioned in kit size. Therefore your roof size will need to be smaller to allow for edge overlaps. e.g. 6metre x 3metre roof kit will fit a roof that is no larger than 5.7metres x 2.7metres.
-
This Item:
Flat Rubber Roof Kits
As low as £239.83 £199.86
-
Pipe Boot 12mm up to 75mm
£30.00 £25.00
-
Pipe Boot 75mm up to 150mm
£36.00 £30.00
-
Rubber Primer - ClassicBond®
£6.00 £5.00
-
15m2 600g Fibreglass Roof Kit Iron Dark Grey
£194.24 £161.87
-
9” Form Flash for Detailing
£18.00 £15.00
-