10kg Acrylic Roof Coat | Roof Paint | Roof Sealant
CrylicRoof roof coating
5m2-10m2 coverage using 1-2kg
Our CrylicRoof repair liquid has been formulated to give optimal flexibility and durability.
All three colours are low odour* and benefit from a high dry film build due to the low VOC content.
CrylicRoof coatings are a low odour, low VOC, solvent-based acrylic resin system for use when waterproofing various roofing surfaces.
● Low odour* and VOC emissions
● Ready to use straight from the can
● Cold applied
● Instant shower protection
● Fibre-reinforced for gap filling
● Unaffected by temperature CrylicRoof is ready for use and is cold applied to all types of roofs, including flat and pitched as well as bituminous surfaces, gutters, brickwork, asbestos (see porous substrates section), concrete, felt, metal and fibreglass surfaces. CrylicRoof is not suitable for walkways or balconies and is not suitable for use on PVC or timber surfaces or for internal use.
Coverage 1 to 2kg/mtr² (depending on surface) Smooth surfaces require less material*
CrylRoof content
- 1x 10kg Tin
Suggested Tools Contents (not included )
- 1x Box of gloves
- 2x 50mm Brushes
- 1x 6¨ medium pile Roller
- 1x Telescopic pole
*Optional tape (may not be available on some platforms
+ See datasheet for full details
HOW TO USE THIS PRODUCT:
CrylicRoof One Coat Roof Repair is ready to use directly from the tin and suitable for use on:
Pitched or Flat Roofs, Asphalt, Bituminous Felt, Brickwork, Concrete, Gutters, Metal
Surfaces.
PREPARATION: Before application, it is important to make sure the working surface
is clean and dry and free from loose debris such as grit, moss, lichen, dust and dirt.
Any areas showing signs of fungicidal growth should be treated with a fungicidal wash
(applied in accordance with manufacturers instructions) prior to application of CrylicRoof.
Clean metal surfaces thoroughly with a wire brush to remove rust and provide a good
key. Cut and seal splits or blisters prior to application of CrylicRoof.
APPLICATION: Apply to the area using brush or roller at a rate of 1-2 kg per m2 dependant
on the substrate, it can also be applied to damp surfaces. CrylicRoof will bridge cracks up
to 10mm wide due to its fibre content, but larger gaps or voids are best filled with a
suitable flexible filler and left to dry prior to applying CrylicRoof.
DRYING TIME: Depending on atmospheric conditions or working environment, CrylicRoof
typically dries within 2-3 days and will be waterproof immediately after application.
H226 Flammable liquid and vapour. H304 May be fatal if swallowed and enters airways.
H336 May cause drowsiness or dizziness. H411 Toxic to aquatic life with long-lasting effects.
P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment.
P280 Wear protective gloves /protective clothing / eye protection /face protection.
P501 Dispose of contents / container in accordance with local / regional / national /
international regulations. EUH066 Repeated exposure may cause skin dryness or crack.
Contains Naphtha (petroleum), hydrodesulfurized heavy.
UN: 1263 PAINT (WHITE SPIRIT 150/200)
-
This Item:
10kg Acrylic Roof Coat | Roof Paint | Roof Sealant
Special Price £76.67 £63.89 Regular Price £80.50
-
50m roll of 75mm Woven Glass Tape
£11.99 £9.99
-
A170 Drip Facia Trim 3m Length
£17.99 £14.99
-
B230 GRP/Fibreglass Raised Edge Trim 3m Length
£17.99 £14.99
-
D260 Fillet Trim 3m Length
Special Price £13.79 £11.49 Regular Price £17.99
-
C100 Sim Lead Flashing Trim 3m Length
Special Price £13.79 £11.49 Regular Price £17.99
-