Description

1. GRP Roof Trims

Professional Fibreglass Roof Edge & Detail Trims – 3m Lengths

Complete your fibreglass roof the right way.

Our GRP trims are designed to integrate seamlessly with fibreglass roofing systems, delivering clean lines, proper water management, and long-term durability. All trims are supplied in 3 metre lengths and manufactured from high-quality fibreglass for strength and weather resistance.

A170 Drip Trim (Small Profile)

Length: 3m
Drop: 65mm
Flange: 80mm+
Roll: 10mm

Our smallest dedicated drip trim, ideal for efficiently directing water into the gutter while maintaining a subtle edge profile.

Pairs with: B230 Raised Edge Trim

B230 Raised Edge Trim

Length: 3m
Visible Face: 105mm
Flange: 100mm+
Roll: 10mm

Designed to create a clean perimeter upstand. Commonly matched with the A170 for a balanced, professional finish.

A200 Drip Trim (Mid Profile)

Length: 3m
Drop: 90mm
Flange: 80mm+
Roll: 10mm

A mid-sized drip trim offering increased water diversion capacity.

Pairs with: B260 Raised Edge Trim

B260 Raised Edge Trim

Length: 3m
Visible Face: 125mm
Flange: 100mm+
Roll: 10mm

A popular mid-profile raised edge trim for domestic flat roofs.

A250 Drip Trim (Large Profile)

Length: 3m
Drop: 140mm
Flange: 80mm+
Roll: 10mm

Our largest drip trim — ideal where greater drop or deeper fascia coverage is required.

Pairs with: B300 Raised Edge Trim

B300 Raised Edge Trim

Length: 3m
Visible Face: 175mm
Flange: 100mm+
Roll: 15mm

Large profile upstand trim for bigger fascia details or commercial settings.

AT195 EX/Internal Trim

Length: 3m
Height: 70mm
Flange: 100mm+

Used to simulate traditional lead bay drips and internal detailing. Not classified as a drip trim but widely used for decorative and detail finishing.

C100 Simulated Lead Flashing

Length: 3m
Height: 100mm
Width: 20mm

Provides the look of traditional lead without the weight or cost. Designed for use against wall abutments.

Compatible with: C7 corners
Wall penetration: approx. 35mm

D260 Wall Fillet Trim

Length: 3m
Height: 150mm
Width: 120mm

Creates a smooth transition from deck to vertical surface. Essential for neat, professional wall junctions.

Pairs with: C2 Fillet Trim and C3 Corners

Installation Guide (Quick Overview)

Fixing Method:

• Apply polyurethane (PU) adhesive in 30mm beads at 300mm intervals

• Secure using nails or staples (avoid nailing through visible front edge)

• Join trims securely at ends

• Reinforce raised edge trims if regular ladder access is expected

Drip Trim Tip:
Always leave sufficient clearance for guttering.

Simulated Lead Tip:
Install into a mortar bed joint or chase cut. Seal with clear silicone once fixed.