10 Square Metre 450g Fibreglass Roof Kit Iron Grey
- Polyester Roofing Resin & Topcoat
- 450g/m² Fibreglass chopped strand matting.
- 50m by 75mm woven tape to bandage your trims to the deck.
Your Fibreglass Roof Kit Contents:
Excludes any warranty
-
10m2 450g Fibreglass Roof kit
3x 5kg GP10 General Purpose Roof Resin 3x Catalyst 100g
2x 5kg Topcoat DARK Grey 2x Catalyst 100g
1x Fibreglass rolls - 450g 11m2 5KG
1x 75mm Woven tape 50m
-
Please note this is our low-cost economy option. We have a premium range here
Important information
Our GRP kits are designed for use on OSB (Orientated Stranded Board) with Tongue & Groove Edge, The 50 Linear Metre Woven bandage is for use around the perimeter edges where the trims meet the roof decking. Additional Woven and Resin may be required and can be purchased separately (here).
*Please note product label may vary depending on stocks and suppliers
| Roof Size | 10 m² |
|---|---|
| Important Information To Consider | We have taken the hard work out of providing the correct quantities for you. By simply selecting your roof size in m² we guarantee you will have the correct volume of Resin's, Topcoat's, Hardeners and Matting to complete the flat roof you have. Please ensure you order the correct kit size for your project, we cannot take any responsibility for kits ordered that are the incorrect size for your roof. If your a DIY user we strongly recommend ordering a slightly larger kit than required to allow for any unforeseen circumstances or mis calculations with mixing ratio's. For further technical support call us on 0207 101 3977 |
Safety Sheet for Resin Safety Sheet For Topcoat Safety Sheet for Catalyst
View Downloadable Information
-
This Item:
10 Square Metre 450g Fibreglass Roof Kit Iron Grey
£229.02 £190.85
-
A200 Drip Facia Trim 3m Length
£12.30 £10.25
-
A170 Drip Facia Trim 3m Length
£12.30 £10.25
-
B230 GRP/Fibreglass Raised Edge Trim 3m Length
£12.30 £10.25
-
D260 Fillet Trim 3m Length
£12.30 £10.25
-
Universal GRP corner trims
£10.36 £8.63
-
