100m2 450g Fibreglass Roof Kit Iron Grey
- Polyester Roofing Resin & Topcoat
- 450g/m² Fibreglass chopped strand matting.
- 75m by 75mm Tape to bandage your trims to the deck.
100m2 450g GRP Roof Kit
Your Fibreglass Roof Kit Contents:
100-m2 450g Fibreglass Roof kit
6x 20kg Low cost Roof Resin 5x Catalyst 500g
1x 5kg GP10 General Purpose Roof Resin 2x Catalyst 100g
3x 20kg Topcoat DARK Grey 3x Catalyst 500g
1x Fibreglass rolls - 450g 6.6m2 3KG
1x Fibreglass rolls - 450g 76 m2 33KG
1x Fibreglass rolls - 450g 22m2 10KG
2x 75mm Woven tape 50M
Important information
Our GRP kits are designed for use on OSB (Orientated Stranded Board) with Tongue & Groove Edge, The 50 Linear Metre Woven bandage is for use around the perimeter edges where the trims meet the roof decking. Additional Woven and Resin may be required and can be purchased separately (here).
| Roof Size | 100 m² |
|---|---|
| Important Information To Consider | We have taken the hard work out of providing the correct quantities for you. By simply selecting your roof size in m² we guarantee you will have the correct volume of Resin's, Topcoat's, Hardeners and Matting to complete the flat roof you have. Please ensure you order the correct kit size for your project, we cannot take any responsibility for kits ordered that are the incorrect size for your roof. If your a DIY user we strongly recommend ordering a slightly larger kit than required to allow for any unforeseen circumstances or mis calculations with mixing ratio's. For further technical support call us on 0207 101 3977 |
-
This Item:
100m2 450g Fibreglass Roof Kit Iron Grey
£892.54 £743.78
-
G180 Gulley Trim Expansion Joint 3m
£12.30 £10.25
-
A200 Drip Facia Trim 3m Length
£12.30 £10.25
-
B260 GRP/Fibreglass Raised Edge 3m Length
£12.30 £10.25
-
D260 Fillet Trim 3m Length
£12.30 £10.25
-
E280 Expansion Joint 280mm 3m Length
£14.22 £11.85
-
