9” Form Flash for Detailing
9 Inch Elastoform Uncured Tape Used For: Designed to form internal / external corners
9 Inch Elastoform Uncured Tape Per Lin Metre How to videos
Used For: Designed to form internal / external corners / awkward features / pipes / penetrations / drain outlets and any other feature where the ability to stretch and form the material is required. 225mm uncured flashing can also be used to create an inexpensive pipe boot.
Installation Notes:The EPDM surfaces to receive the flashing must be dry, clean and free from dust and dirt. Wherever un-cured flashing tapes are to be used the surface must be primed with ClassicBond Rubber Primer and allowed to dry (touch dry), smooth side down!