Grey 5kg Liquid Roof Sealant Paint - Flat Roof Repair Liquid - aCrylicRoof High Performance waterproof coating

Coverage 1 to 2kg/mtr² (depending on surface) Smooth surfaces require less material* 

CrylicRoof content

• 1x 5kg Tin 1-2kg per/m²  Approx  2.5m² - 5m²

Our CrylicRoof repair liquid has been formulated to give optimal flexibility and durability.

All three colours are low odour* and benefit from a high dry film build due to the low VOC content.

CrylicRoof coatings are a low odour, low VOC, solvent-based acrylic resin system for use when waterproofing various roofing surfaces.

● Low odour* and VOC emissions

● Ready to use straight from the can

● Cold applied

● Instant shower protection

● Fibre-reinforced for gap filling

● Unaffected by temperature CrylicRoof is ready for use and is cold applied to all types of roofs, including flat and pitched as well as bituminous surfaces, gutters, brickwork, asbestos (see porous substrates section), concrete, felt, metal and fibreglass surfaces. CrylicRoof is not suitable for walkways or balconies and is not suitable for use on PVC or timber surfaces or for internal use. 

+ See datasheet for full details

HOW TO USE THIS PRODUCT:

CrylicRoof One Coat Roof Repair is ready to use directly from the tin and suitable for use on:

Pitched or Flat Roofs, Asphalt, Bituminous Felt, Brickwork, Concrete, Gutters, Metal

Surfaces.

PREPARATION: Before application, it is important to make sure the working surface

is clean and dry and free from loose debris such as grit, moss, lichen, dust and dirt.

Any areas showing signs of fungicidal growth should be treated with a fungicidal wash

(applied in accordance with manufacturers instructions) prior to application of CrylicRoof.

Clean metal surfaces thoroughly with a wire brush to remove rust and provide a good

key. Cut and seal splits or blisters prior to application of CrylicRoof.

APPLICATION: Apply to the area using brush or roller at a rate of 1-2 kg per m2 dependant

on the substrate, it can also be applied to damp surfaces. CrylicRoof will bridge cracks up

to 10mm wide due to its fibre content, but larger gaps or voids are best filled with a

suitable flexible filler and left to dry prior to applying CrylicRoof.

DRYING TIME: Depending on atmospheric conditions or working environment, CrylicRoof

typically dries within 2-3 days and will be waterproof immediately after application.

H226 Flammable liquid and vapour. H304 May be fatal if swallowed and enters airways.

H336 May cause drowsiness or dizziness. H411 Toxic to aquatic life with long-lasting effects.

P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment.

P280 Wear protective gloves /protective clothing / eye protection /face protection.

P501 Dispose of contents / container in accordance with local / regional / national /

international regulations. EUH066 Repeated exposure may cause skin dryness or crack.

Contains Naphtha (petroleum), hydrodesulfurized heavy.

UN: 1263 PAINT (WHITE SPIRIT 150/200)