3 Metre Wall Trim 25 x 90 (Or Gutter Drip Trim)
Metal Wall Trim available in Standard and Deep sizes
Metal Wall Trim for Rubber Roofing
Used For: Used in conjunction with Lap Sealant to create a waterproof junction on up-stands or wall junctions.
Can also be used as Gutter Drip Trim when installing Metal Edge Trims (Can be top or side fixed with screws included)
When using as a wall up-stand trim the membrane is pressed into the wall or up-stand using the Wall Trim.
Requires use of Angle Grinder to create channel in brickwork or render
Height: 90 mm
Width: 25 mm
Colour: Black
Qty in Pack: 1
(Includes 35mm self-sealing Hex Fasteners)
Don’t forget to order Mastic. The sealant is inserted along the top of the Wall Trim into the pre-ground slot in the wall or up-stand.
If you don’t have an angle grinder use our 3-metre termination bars instead of the wall trim to create a watertight seal on all up-stands
Installation | How to install Metal Wall Trim on a Flashing Trim![]() How to Install a Wall Trim or terminate the rubber membrane under a pitched roof |
---|
-
This Item:
3 Metre Wall Trim 25 x 90 (Or Gutter Drip Trim)
£10.50 £8.75
-
9” Form Flash for Detailing
£18.00 £15.00
-
Black Mastic
£3.00 £2.50
-
Rubber Primer - ClassicBond®
£6.00 £5.00
-
DIY Seam Roller
£5.99 £4.99
-
20 Square Metre 450g Fibreglass Roof Kit Iron Grey
£219.82 £183.18
-