Rubber Primer - ClassicBond®
Rubber Primer - ClassicBond® Used For: Rubber Primer used to bond tapes and accessories to EPDM
EPDM Primer
Used For:Rubber Primer used to bond tapes and accessories to EPDM Rubber membrane i.e. EPDM Rubber membrane to:
9" Elastoform
6" Cover Tape
3" Splice Tape
Pipe boot
Internal Drain using 9" Elastoform etc
Available in three Sizes: 0.25 Ltr / 0.5Ltr / 1 Ltr
A 0.25 Litre Tin will cover the following
Coverage: 6.5 Metres of 3" Splice Tape (For Both Sides) or
Coverage: 6.5 Metres of 6" Cover Tape or
Coverage: 4.5 Metres of 9" Elasoform Tape or
Note: Do not use this primer to adhere membrane to membrane without the use of splice tape
Application: Apply to EPDM rubber membrane only DO NOT APPLY TO TAPES DIRECTLY using a paint brush or scrubbing pad. Make sure the primer is even and does not puddle. Ensure that the primer is touch dry prior to applying mating parts
-
This Item:
Rubber Primer - ClassicBond®
£6.00 £5.00
-
3 Metre Wall Trim 25 x 90 (Or Gutter Drip Trim)
£10.50 £8.75
-
Water Based Adhesive ClassicBond®
£21.00 £17.50
-
Pipe Boot 75mm up to 150mm
£36.00 £30.00
-
Flat Roof Breather Vent
£17.99 £14.99
-
Black Mastic
£3.00 £2.50
-